The parameters of the hydraulic system have been debugged before leaving the factory. Before running, just inject the appropriate hydraulic oil into the oil tank, and the oil level should be higher than half of the oil level agent. We recommend using 46# anti-wear hydraulic oil.
When starting up, please make sure that the motor turns correctly, and fill the pipeline and cylinder with oil. Turn the oil pump forward and reverse several times to ensure that the air in the line is exhausted.
After the worktable and power head move normally, please check the oil level of the oil tank again and make up the hydraulic oil. At the same time, check whether there is leakage at the joint of the pipeline.
Boot up
1.Provide power supply. The electrical system of the machine tool is designed according to three-phase AC power supply, and its power supply voltage is three-phase four-wire 380V 50/60HZ.
2.Turn all the circuit breakers in the control cabinet to the "ON" position, turn the external rotary switch to the "ON" position, and turn the "power" on the operation panel to the right ON position.
3.Check whether the rotation direction of all motors is correct, and install suitable processing tools. Set the relevant parameters of the work-piece to be processed on the man-machine interface.
4.Release the "emergency stop" to execute the return of each machining axis and turntable. Load the work-piece and press the "Clamping" button to allow the work-piece fixture to clamp the work-piece.
5.Press the "Start" button, and the system will automatically process the work-piece.
6After the processing is completed, each spindle will automatically return to position, waiting for the work-piece to be loaded and processed again.
When the "Cleaning Mode" function is selected, each machining axis will automatically process the remaining unprocessed work-pieces and stop each spindle in turn.
Company Introduction:
Fujian Nanan Delin Machinery Manufacturing Co.,ltd
Delin Company Located in sanitary home Nanan,is the earliest professional casting equipment manufacturer in the southern parts of china.
With the area of 50000m2,350 workers including 65 middle&highclass professional technicians.
Main Products:Automatic molding machine,low pressure die casting machine,gravity casting machine,furnace,core shooting machine,mix sand machine,abrator,etc...
Widely used in plumbing,sanitaryware,car spares,valves.iron cast lines,etc
It provides a series of service,including technical conseling,mould designing,live training for staff,etc.
Our Service:
We have strict management system,complete quality guarantee system and fine pre-sale and after-sale service system.
1)Pre-sale Service System
Please do not hesitate to contact with us If you are interested in machine
We can design the machine you requirements
2)After-sale Service System
24/7 on line,including mobile/wechat/whatsapp etc
Our technician is available to visit and go to your place,and they will help your side for installation,maintenance,and training.
1-2 Warranty Period
3)Payment
30% Deposit by TT,and The rest 70% by photos or you can check the quality on our factory before they shipment.
Audited Supplier 
){kind=link}